Service hotline：
010-51669912
<tfoot id="m6cm0"></tfoot>
010-51669912
time：2020-01-13 browse：second
MFE600 Intelligent Electromagnetic Flowmeter is designed and manufactured with the most advanced domestic and abroad technology, featuring high accuracy, reliability, good stability and long service life.
We pay our attention to every detail in the process of the product structure design, material selection, manufacturing, assembly and factory testing etc. With a water tower up to 35m as pressure stabilizer for actual flow calibration, we have a professional production line for electromagnetic flowmeter, also we design and develop a series of software and hardware for electromagnetic flowmeter for mass production to ensure high quality in long term use. The product has backlight and wide temperature-ranged Chinese LCD display. With fully practical function, visual display, easy operation, it saves troubles for on-site installation operation and maintenance. MFE600 can be widely used in industrial fields such as petroleum, chemical, metallurgy, water supply and drainage, steel, coal, paper, food, textile, environmental protection and other municipal administration, water conservancy construction field etc
1. The electromagnetic flowmeter is an instrument for volume flux measurement. The flux measurement will not be influenced by the fluid density, viscosity, temperature, pressure and electrical conductivity changes. There is a linear relationship between the inducing voltage signal of sensor and the average velocity. Its accuracy is high.
2. Due to the unimpeded flow and no moving parts, it will not cause additional energy loss or jam. Therefore it is remarkable for energy saving, especially it is suitable for measurement of liquid-solid two-phase fluids such as sewage, slurry, pulp, coal slurry, pulp etc.
3. The electromagnetic flowmeter has no mechanical inertia. With good sensitivity, it can measure the transient pulsating flux, and has good linearity.
4.It has low requirements for installation. Short straight pipe is needed, generally 5D in front of the flowmeter, 3D behind it (D is the interior diameter of the selected instrument).
5. Only the lining and electrodes contact with the media, as long as the selection of electrode and lining materials is proper, they can be corrosion resistance and abrasive resistance, and are able to ensure long-term use.
6. When power supply is off suddenly, EEPROM can protect parameter setting and cumulative values.
7. The converter uses a low-power consumption single-chip for processing data. And it uses SMD electronic components and SMT surface mounting technology to ensure reliable performance, high accuracy, low power consumption and zero stability. With Chinese dot matrix LCD display, it can display the integrated flux, transient flux, velocity, flow percentage and other parameters.
8.Multi-electrode structure ensures high accuracy. With the grounding electrode, it doesn't need grounding ring, therefore saves the cost.
9. The low-frequency rectangle wave excitation improves the flux stability. It has low power consumption and good low flow characteristics.
10.Bidirectional measurement system can be used for measuring forward flux and reverse flux.
| 量程范圍 | 100SCCM～30SLM |
| 測控范圍 | 量程比100:1 |
| 準確度 | ±1.0%F.S |
| 線性 | ±0.5%F.S |
| 重復精度 | ±0.2%F.S |
| 響應時間 | <0.8s |
| 數字量 | RS232/485，MODBUS協議 |
| 模擬量 | 0～5V、4-20mA、1～5V |
| 供電 | ±15VDC，24VDC |
| 工作溫度 | 0～50℃ |
| 工作壓力 | 工作壓降：<0.01Mpa |
| 最大耐壓 | 3MPa/10MPa |
| 電氣連接 | DB15孔 |
| 漏率 | 1×10-SCCSHe |
| 溫度系數 | ±0.025%F.S/℃ |
| 底座材質 | 316L |
| 密封材質 | 氟橡膠，氯丁橡膠，丁腈橡膠 |
| 接頭 |
φ3，φ6，1/8"，1/4" |
Telephone：010-51669912
Mobile phone：15910733293
Zip code：101105
Fax：010-51669912-2
Address：NO. 20, III, Liandong Valley, Yongle Development Zone, Tongzhou District, Beijing, China
current location：
